GARAGE & SHED Shop Now
FIND A LOWER PRICE & we'll match it
LARGE PROJECT? Call for site visit & quote
CLEARANCE Shop Now

Autopa RetractaPost-GL 745 Retractable Parking Post

The Autopa RetractaPost-GL offers a highly effective and robust way to protect premises and vehicles. The RetractaPost-GL is raised and lowered vertically.

  • The post is 745mm above ground when raised and is fabricated from square mild steel tube which is then galvanised
  • When lowered the post is fully below ground and covered using the integral lid. The post is lockable in the raised position by rotating the post 45° and then pressing the high-security push button 7-pin security lock
  • The post is unlocked using the supplied key, rotated and then lowered
  • The RetractaPost-GL is ideal for protecting vehicle forecourts, commercial premises, car parks and domestic driveways
  • 745mm tall when raised, 1070mm below ground
More Info
Loading...
Code Product Information 1+ Quantity Qty
AURPGL745001
AURPGL745001 Autopa RetractaPost-GL 745 Retractable Parking Post | 745h x 76w mm | Galvanised 1+ £279.59 (ex. VAT)
£279.59 (ex. VAT)
1
AURPGL745003
AURPGL745003 Autopa RetractaPost-GL 745 Retractable Parking Post | 745h x 76w mm | Stainless Steel 1+ £414.66 (ex. VAT)
£414.66 (ex. VAT)
1
AURPGL745004
AURPGL745004 Autopa RetractaPost-GL 745 Retractable Parking Post | 745h x 90w mm | Galvanised 1+ £328.21 (ex. VAT)
£328.21 (ex. VAT)
1
AURPGL745006
AURPGL745006 Autopa RetractaPost-GL 745 Retractable Parking Post | 745h x 90w mm | Stainless Steel 1+ £420.07 (ex. VAT)
£420.07 (ex. VAT)
1
AURPGL745007
AURPGL745007 Autopa RetractaPost-GL 745 Retractable Parking Post | 745h x 101w mm | Galvanised 1+ £420.07 (ex. VAT)
£420.07 (ex. VAT)
1
AURPGL745009
AURPGL745009 Autopa RetractaPost-GL 745 Retractable Parking Post | 745h x 101w mm | Stainless Steel 1+ £494.35 (ex. VAT)
£494.35 (ex. VAT)
1
Total: £0.00 (No VAT)
Business Services
Autopa RetractaPost-GL 745 Retractable Parking Post
  • It is recommended that posts are placed no further than 1,200mm apart to ensure no vehicle may pass between the raised posts
  • An excavated hole of approximately 900mm deep and 300mm diameter is required for installation
  • Provision for suitable drainage must be made (chippings or similar) at the bottom of the hole. The uppermost 3-400mm must be concrete
  • The lid of the post should be no more than 10mm above finished ground level
  • Other colour options available upon request
Be the first to review Autopa RetractaPost-GL 745 Retractable Parking Post. Write a review
Top