Office Wall Mounted Shelving Kits in White | 900mm Wide | Beech Shelves

• Simple, practical and adaptable wall-mounted storage
• Uprights and brackets with an anti-bacterial coating
• The 270mm bracket withstands loads up to 69kg
• A shelf overhang of 150mm is recommended for optimum shelf capacity
• 18mm thick wipe-clean beech or melamine shelves
• Not recommended for fixing to plasterboard walls

Safety Protection Feature

• Drop-and-lock bracket design prevents the bracket from accidently being dislodged during use
• The Shelf must first be removed and the bracket must be angled upwards to enable bracket withdrawal from the upright.

Installation

• An upright fixing pack and shelf fixing pack is provided with kits, however these fixing packs may not be appropriate for every application.
• The strength of the installation is dependent on the strength of the fixings; it is the installer's responsibility to ensure the strength and suitability of these fixings (especially when fixing to partitions or hollow/stud walling) and that the substrate material is adequate
• Please note: it is recommended that the uprights are spaced no more than 600mm apart for optimum load capacity

BiGDUG recommend that 3" No.10 screws are used with the relevant wall plugs. We also recommend that individuals should consult a suitably qualified person to ensure that the uprights are installed correctly.

A shelf overhang of approximately 150mm should be left at each end. The type and thickness of shelf material and the application must be considered before fixing the system.

• Twin Slot Wall Mounted Shelving Kits Assembly Instructions